Mini Submersible Portable Electric Water Pump Portable Hand Self-priming Liquid Transfer Pumps Electric Drill Pump Oil Fluid Water Pump Set Home Garden Outdoor Tool(Updated Version)

1. Tool-free disassembly and cleaning: Flexible structural design, easy to disassemble and clean without any tools.2. Easy to carry and use: This pump is small in size and equipped with a handle, which is very convenient to carry, so it can be used in small spaces. Suitable for swimming pools, ponds, gardens, basements, aquariums, irrigation and other places.Product Details:Material: ABSBasic tube inner diameter: 15mmUpdated Version Tube Inner Diameter: Inlet/Outlet Inner Diameter: 16mmOuter/inlet outer diameter: 19mm (suitable for 6 tubes)FeatureHousehold electric drill drive pumpNo power required, as long as there is a hand electric drill, it can be used. It can pump water without power supply, which is convenient and fast, and can be adapted to different drilling rigs only by installing the corresponding chuck.Large flow, stable performance and high efficiency. The flow rate of the pump varies depending on the power and speed of the drill used and can pump 20 to 30 liters of water per minute.Stable performanceMade of ABS plastic, small size, light weight, large current, low running noise and high efficiency. environmentally friendly, it will not contaminate liquids. Exquisite craftsmanship makes it last longer.Easy to use Connect the water pipe to the nozzle to increase the water column without making too much noise. Note: When using, please make sure the joint is well sealed.WARNING:Do not operate the main process drilling pump or drop the power cord into the water while standing in water. Always stand on dry ground and keep all codes dry.Tips:1. In order to achieve the best start-up and prolong the service life, add a small amount of lubricating oil to the pump inlet before use, and rinse with clean water after each use.. It is recommended to install the pump on the surface for safe use. Make sure the inlet hose is sealed and as short as possible, the hose should not exceed 9 feet (2.75 meters).3. Work in the temperature range of 5°~49°C4. When pumping abrasives or liquids containing solids, use a filter on the inlet line for longer pump life.5. Install and start the rig. Observe whether a certain amount of fluid is sucked into the pump within 15-20 seconds in the oil inlet pipe. If not, check that the oil inlet pipe is properly installed on the oil inlet pump. Do not run dry. If the pump fails to start, check for kinks or blockages in the hoses. Pump depends on whether the fluid is pumped for lubrication6. The recommended speed is 1500-3500 rpm. The lift and flow are related to the speed. The higher the speed, the higher the lift and the higher the flow.At 1500 rpm, the head is about 1.5 meters, the flow is about 15L at 3000 rpm, the head is about 3 meters, and the flow is about 30L per minute. Note: Do not run the pump in reverse.

• Portable and safe: Portable ergonomic handle, lightweight, easy to carry and store
• Multiple uses: Portable transfer utility pump can be used efficiently in aquariums, rain barrels, filling water beds, flushing water heaters, flood area drainage, etc.
• Provide you with a comfortable and quiet environment: Our pump runs quietly and smoothly, bringing you a relaxing and peaceful time.