Capacitance Meters, 1.36 PS100 Auto Circuit Tester Diagnostic AVOmeter Test Tool Automotive OBD2 Scanner(PS100)

PS100 Red and Black Color for choosePS100:Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester, and bad ground indicator, the is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician looking for a fast and accurate solution to electrical system diagnostics.PS100 Feature:Peorms every type of service including power injection, measurement, ground testing, polarity checks, continuity testing, and component activationEasy to read AVOmeter allows you to read , current, and resistance at the finrtipWith a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.Simultaneously use the hot lead and the ground lead to activate components right in your handInstantly identifies positive, negative, and open circuitsTests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fusesInstantly checks the continuity of switches, relays, nd diodesCircuit breaker protectedBuilt-in Flashlight enables you to work in the darktone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment20ft (extendable) cable provides excellent accessibility to test along the vehicleExtremely easy to use and highly reliablePS100 Work Mode:There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.1. DC Contact the probe tip to a circuit, then the LCD display will read the DC with a resolution of 0.1 volt.2. AC Contact the probe tip to a circuit, then the LCD display will read the Max. , the Min. , frequency and duty cycle.3. ResistanceContact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.4. Tone On/OffJust do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the tone is turned on. If a short low beep is heard, the tone is turned off.PS100 Specifications:Display: TFT color display (160 x 128 dpi)Operating Temperature: 0 to 60°C (32 to 140°F)External Power: 12.0 or 24.0 V power is provided via the vehicle batteryLength x Width x Height: 26mm(4.96") x 46.5mm(1.83") x 35mm(1.38")NW: 0.105kg (0.23lb),GW: 0.726 kg(1.6lb)PS100 Packa List:1 × PS100 1 × Rugd blow molded case 1 × 20ft. extension cable1 × Probe tip 1 × Battery hookup clips 1 × Cigarette lighter adapter 1 × User's ManualPS100 FAQ: