2.2KW CNC Spindle Motor 2200W Water Cooled 800Hz Automatic Tool Change Spindle 24000rpm 80mm for Milling and Drilling

Description:1:Power line Three-color lines connected with U.V and W phases/ yellow and green wires grounded Temperature control line 110C thermistor two-phase connected with the temperature-control protector2: Cooling water feed Pump lift 8m³3: Pole change and dust removal pressure 0.2-0.3 Mpa (6/4 hoses)4: Quantity of proximity switches Pole hanging and pole discharge NPN (normally open) N.O. Wiring method of the proximity switch,Brown wire connected with +24VDC blue wire connected with 0VDC Signal load end connected with +24VDC/the other enoconnected with the black wire5: Air seal pressure 0.1-0.2Mpa (4/2 hoses)6: Cooling water yielding(2 and 6 ends terminated with 8/6 hoses)7: Air inlet pressure of the cylinder 0.65Mpa (6/4 hoses)Special warning:1. The electric main shaft shall be installed at the clamped position. otherwise the bearing will be easily damaged!2. The main shaft shall entirely stop before the tool changing. The manual tool changing button shall not act during the rotation of the shaft: otherwise it will easily result in the seizure of the shaft!3.The compressed air shall be clean and dry, and the filter accuracy shall be 0.1micron! Air seal is normally open. lt is recommended to use the two-level filter, and the filter accuracy is 0.5 micron/ 0.1 micron respectively. The air filter is installed with the self-discharge device.Drive : MotorOperating Speed : 24000Application : Millingname : 2.2kw Water Cooled Automatic Tool Change SpindleFrequenc : 800Hzvoltage : 220v ±10%Rotating speed : 24000rpmDiameter : 80mmShaft end connection : ISO20Pole number : 4PWeight : 8KG

• CPBGXJZD 2.2KW CNC Spindle Motor 2200W Water Cooled 800Hz Automatic Tool Change Spindle 24000rpm 80mm For Milling and Drilling